Product introduction

Application of W5-47 high temperature centrifugal fan:

W5-47 high-temperature centrifugal fan is suitable for transporting non-corrosive and non-spontaneous combustion. According to different models and machine numbers, it can be used for transporting gas at a temperature of 250-700 degrees. If the gas contains a lot of dust, a dust removal device should be installed in front of the air inlet of the fan to increase the service life of the fan.

Type of W5-47 high temperature centrifugal fan:

1. The induced draft fan is made of single suction, and there are nine types of machine numbers: No4, 5, 6, 8, 9, 10, 11, 12, and 12.4.

2. The induced draft fan can also be made into two forms of forward rotation or reverse rotation. Looking at the fan from the transmission part, if the impeller rotates clockwise, it is called right rotation, which is represented by "right": counterclockwise rotation is called left rotation, and " Left" means.

3. The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing. "Right" and "left" can be made into three angles of 0°, 90°, and 180°.

Structural characteristics of W5-47 high-temperature centrifugal fan:
The fan is composed of impeller, casing, air inlet, transmission part and other parts, and is equipped with an adjusting door.

Parameters of W5-47 high temperature centrifugal fan